Pentagram Cerberus ADSL2+ Lite Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 75

Pentagram Cerberus ADSL2+ Lite Скачать руководство пользователя страница 9

Cerberus ADSL2+ Wi-Fi (P 6331-5)

9

Resetting router

•

Turn router on and wait about 2 minutes for router initialization.

•

Press and hold

RESET

button on the back panel of router for 10 seconds.

Connecting Cerberus to Computer.

Cerberus can be connected to computer via Ethernet or WLAN:

Connecting via Ethernet Port (Ethernet Card)

If there is an available LAN card present on your PC, you just simply connect ADSL router and
PC through the Ethernet cable. Once you establish Internet connection, you could browse the
Web through the Ethernet cable.

Connecting via WLAN Interface (Wireless Card)

To connect PC to Cerberus via WLAN, Wireless Adapter must be properly installed and
configured and both router and PC must be in the same subnet.

Configure TCP/IP

This part will help you to configure your computer to communicate with Cerberus ADSL2+ Wi-
Fi router properly. Computer must be either equipped with network adapter connected directly
to  ADSL2+  Wi-Fi  router  or  wireless  network  adapter  (compatible  with  Wi-Fi  802.11b/g
standard).  Wireless  network  adapter  must  have  the  same  session  ID  (ESSID)  and  establish
connection with the network created by router. You can also connect to ADSL2+ Wi-Fi router
via  network  hub/switch.  Default  IP  address  of  the  router  is  192.168.1.1  and  subnet  mask  is
255.255.255.0.  Fastest  and  easiest  method  to  configure  your  computer  is  to  obtain  an  IP
address automatically from router’s DHCP server.

Make sure that TCP/IP protocol and network adapter are installed on your computer.

«
...
7
8
9
10
11
...
»

Содержание Cerberus ADSL2+ Lite












































































Отзывы:

Нет отзывов