Cerberus ADSL2+ Wi-Fi (P 6331-5)
32
Enable SNTP
– Select to enable SNTP.
Primary SNTP Server
– The IP address or the host name of the primary SNTP server. This
can be provided by ISP or defined by user.
Secondary SNTP Server
– The IP address or the host name of the secondary SNTP server.
This can be provided by ISP or defined by user.
Tertiary SNTP Server
– The IP address or the host name of the tertiary SNTP server. This
can be provided by ISP or defined by user.
Timeout
– If the router failed to connect to an SNTP server within the Timeout period, it retries
the connection.
Polling Interval
– The amount of time between a successful connection with a SNTP server
and a new attempt to connect to an SNTP server.
Retry Count
– The number of times the router tries to connect to an SNTP server before it
tries to connect to the next server in line.
Time Zone
– The time zone in which the router resides.
Day Light
– Select this option to enable/disable daylight saving time (DST). DST is not
automatically enabled or disabled. You need to manually enable and disable it.
Application / SNMP
SNMP (Simple Network Management Protocol) is a troubleshooting and management
protocol, which uses the UDP protocol on port 161 to communicate between clients and
servers. SNMP uses a manager MIB (management information base) agent solution to fulfill
the network management needs. The agent is a separate station that can request data from
an SNMP agent in each of the different system in the network. The agent uses MIBs as
dictionaries of manageable objects. Each SNMP-managed device has at least one agent that
can respond to the queries from the NMS (Network Management Station). The SNMP agent
supports GETS, SETS, and TRAPS for 4 groups with MIB-II: System, Interface, IP, and ICMP.
The SNMP agent supports three-community names authentication.
Enable SNMP Agent
– Select to enable SNMP Agent on router.
Enable SNMP Traps
– Select to enable SNMP Traps on router.
Name
/
Location
/
Contact
– Information about device used for identification and contact.
Vendor OID
– Object ID – unique identifier for this device.
Community
– Enter Community
Name
and select
Access Right
for this Community.
Traps
– Enter
Destination IP
of the SNTP manager in
Trap Community
– Traps will be send
to this manager. You also must specify
Trap Version
.
Содержание Cerberus ADSL2+ Lite
Страница 4: ......
