Pentagram Cerberus ADSL2+ Lite Скачать руководство пользователя страница 48

Страница: 48 / 75

Cerberus ADSL2+ Wi-Fi (P 6331-5)

Interface

– Select the WAN interface here to configure the CoS for incoming traffic. Only

WAN interface can be selected as VLAN is currently supported only on the WAN side.

Class of Service

– The selections are (in the order of descending priority): CoS1, CoS2,

CoS3, CoS4, CoS5, and CoS6.

User Priority

– The selections are 0, 1, 2, 3, 4, 5, 6, 7.

Notes:

•

Any priority bits that have not been mapped to a CoS default to CoS6, the lowest

priority.

•

Any WAN interface that is not configured has the default Untrusted mode.

•

••

•

Layer 3

The Layer 3 page allows you to map ToS bits of incoming packets from the IP network to
CoS for each WAN/LAN interface.

Interface

– For both WAN and LAN interfaces, you can configure QoS for layer 3 (IP)

data traffic.

Class of Service

– This CoS field allows you to map incoming layer 3 WAN/LAN packets

to one of the following CoS (in the order of descending priority): CoS1, CoS2, CoS3,
CoS4, CoS5, and CoS6.

ToS

– The Type of Service field takes values from 0 to 255.

Default Non-IP

– A static CoS can be assigned to all layer 3 incoming packets (per

interface) that do not have an IP header, such as PPP control packets and ARP packets.
The default is CoS1 (recommended).

Notes:

•

Any priority bits that have not been mapped to a CoS default to CoS6, the lowest

priority.

•

Any WAN interface that is not configured has the default Untrusted mode.

Содержание Cerberus ADSL2+ Lite












































































Результаты поиска

Содержание Cerberus ADSL2+ Lite

Отзывы:

Pentagram Cerberus ADSL2+ Lite, Инструкция по установке и эксплуатации, Страница: 48 / 75

Результаты поиска

Содержание Cerberus ADSL2+ Lite

Отзывы: