Pentagram Cerberus ADSL2+ Lite Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 75

Pentagram Cerberus ADSL2+ Lite Скачать руководство пользователя страница 53

Cerberus ADSL2+ Wi-Fi (P 6331-5)

53

Routing / Dynamic Routing

Dynamic Routing allows the router to automatically adjust to physical changes in the network.
The router, using the RIP protocol, determines the network packets’ route based on the fewest
number  of  hops  between  the  source  and  the  destination.  The  RIP  protocol  regularly
broadcasts routing  information  to  other routers  on the network. The Direction  determines the
direction  that  RIP  routes  will  be  updated.  Selecting  In  means  that  the  router  will  only
incorporate  received  RIP  information.  Selecting  Out  means  that  the  router  will  only  send  out
RIP information. Selecting both means that the router will incorporate received RIP information
and send out updated RIP information.

The protocol is dependent upon the entire network. Most networks support RIP v1. If RIP v1 is
selected, routing data will be sent in RIP v1 format. If RIP v2 is selected, routing data will be
sent in RIP v2 format using subnet broadcasting. If RIP v1 Compatible is selected, routing
data will be sent in RIP v2 format using multicasting.

«
...
51
52
53
54
55
...
»

Содержание Cerberus ADSL2+ Lite












































































Отзывы:

Нет отзывов