Pentagram Cerberus ADSL2+ Lite Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 75

Pentagram Cerberus ADSL2+ Lite Скачать руководство пользователя страница 29

Cerberus ADSL2+ Wi-Fi (P 6331-5)

29

•

••

•

LAN Group x configuration

LAN Group Configuration allows you to configure settings for each LAN group. Notice
that you can also view the status of advanced services that can be applied to a LAN
group. Green indicates that the service is enabled, while red indicates that the service is
disabled.

Unmanaged

Unmanaged is a state when the LAN group is not configured and no IP address has been
assigned to the bridge.

Obtain IP address automatically

When this function is  enabled,  your router  acts like  a client  and requests  an IP  address
from the DHCP server  on the LAN side.  You can release/renew  an  IP  address from  the
DHCP  server  using  the

Release

and

Renew

buttons. Assigned

IP Address

and

Netmask

will be displayed fields.

PPP IP Address

Enables/disables PPP unnumbered feature. Entered

IP Address

should be different but

within the same subnet as the WAN-side IP address.

Use the following Static IP address

This field enables you to change the IP address of the router.

IP Address

– The default IP address of the router (as shown) is 192.168.1.1.

Netmask

– The default subnet mask of your router is 255.255.255.0. This subnet allows

the router to support 254 users. If you want to support a larger number of users you can
change the subnet mask.

Default Gateway

– The default gateway is the routing device used to forward all traffic

that is not addressed to a station within the local subnet. Your ISP provides you with the
IP address of the default gateway.

Host Name

– The host name is used in conjunction with the domain name to uniquely

identify the router. It can be any alphanumeric word that does not contain spaces.

Domain

– The domain name is used in conjunction with the host name to uniquely

identify the router. To access the web pages of the router you can type 192.168.1.1 (the
IP address) or mygateway1.ar7 (Host Name.Domain).

Enable DHCP Server

– Enables/disables DHCP. By default, your router has the DHCP

server (LAN side) enabled. If you already have a DHCP server running on your network,
you must disable one of the two DHCP servers.

«
...
27
28
29
30
31
...
»

Содержание Cerberus ADSL2+ Lite












































































Отзывы:

Нет отзывов