Pentagram Cerberus ADSL2+ Lite, Инструкция по установке и эксплуатации

Страница: 42 / 75

Cerberus ADSL2+ Wi-Fi (P 6331-5)
42
function is disabled by default. By enabling DMZ, you add an extra layer of security
protection for hosts behind the firewall.
To enable DMZ select Enable DMZ checkbox, then select DMZ host parameters from
Select your WAN Connection , Select LAN Group , and Select LAN IP Address lists
and click Apply .
•
••
•
Custom Port Forwarding
The Custom Port Forwarding page allows you to create up to 15 custom port forwarding
entries to support specific services or applications, such as concurrent NAT/NAPT
operation.
Application / Bridge Filters
The Bridge Filters allows you to enable, add, edit, or delete the filter rules. When bridge
filtering is enabled, each frame is examined against every defined filter rule in sequence.
When a match is found, the appropriate filtering action (allow or deny) is performed. Up to 20
filter rules are supported with bridge filtering.
Enable Bridge Filters – Select to enable Bridge Filters function.
Enable Bridge Filters Management interface – Select to enable specified in Bridge Filters
Management interface list interface for Bridge Filters Management.
Select LAN – Select LAN Group which rules you want to configure.
To add a rule, enter the Src MAC (source MAC address), Dest MAC (destination MAC
address), and choose from lists Src Port (source port), Dest Port (destination port), Protocol
and desired filtering Mode , then click Add . You can also edit a rule that you created using the
Edit checkbox. You can delete using Delete .