Pentagram Cerberus ADSL2+ Lite, Инструкция по установке и эксплуатации

Страница: 52 / 75

Cerberus ADSL2+ Wi-Fi (P 6331-5)
52
Routing / Static Routing
If the router is connected to more than one network, you may need to set up a static route
between them. A static route is a pre-defined pathway that network information must travel to
reach a specific host or network. You can use static routing to allow different IP domain users
to access the Internet through the router.
The New Destination IP is the address of the remote LAN network or host to which you want
to assign a static route. Enter the IP address of the host for which you wish to create a static
route here. For a standard Class C IP domain, the network address is the first three fields of
the New Destination IP, while the last field should be 0. The Subnet
Mask identifies which
portion of an IP address is the network portion, and which portion is the host portion. For a full
Class C Subnet, the Subnet Mask is 255.255.255.0. The
Gateway IP address should be the
IP address of the gateway device that allows for contact between the Gateway and the remote
network or host.