PELEKIS ELECTRONICS
30
ISO9001/2015
Rev. 1.04 April 2019
Enable Message Playback
– Exit:
Pressing and releasing the Key ―*‖ device will return two(2) short sounds.
The above Enables the current ―Voice Message‖ even if it is an empty message.
In this way, device also exits the record function and get GSM Gateway back in normal op-
eration.
Start / Stop Recording:
Pressing the Key ―1‖ device will return one(1) short sound that means record just started.
Device will keep recording until max record time.
While recording user can manual Stop the record process by pressing Key ―1‖ again.
After either manual Stop or max record timeout Device returns two(2) short sounds
indicating the saving of the current recorded message.
Voice Message
Seconds
1
15s
2
20s
Play Recorded message:
Pressing the Key ―2‖ device will return one(1) short sound and immediately Playback of
the recorded message starts. While in Playback process there is no possible way to
break the playback process. User should wait until playback finish in order to make any
other action
Disable Message Playback
– Exit:
Pressing and releasing the Key ―#‖ device will return two(2) short sounds.
The above Disables the current ―Voice Message‖ even if it is an empty message.
In this way, device also exits the record function and get GSM Gateway back in normal
operation.
