PELEKIS ELECTRONICS
14
ISO9001/2015
Rev. 1.04 April 2019
With this programming method User and Installer (admin) can Edit-Delete or Ask
the stored settings on the GSM Gateway device that defines its operation.
SMS programming method requires credits for SMS messages on the SIM Card.
The exactly programming method is described in depth on
SMS Programming Table at
page 15
.
Program method:
SMS messaging
Using any convention telephone device, user can accomplish a full voice
communication Call Progress operation.
In order to make this possible , user should plug a conventional telephone device to
the Line terminal.
Hanging off the earpiece of the telephone will turn on the ―LINE‖ led and GSM
device will send out a continuous Tone. Then user must dial the desired number.
Caution :
Pressing the 1st key will stop the playing Tone. This is the expected behavior.
If no key is pressed for period of 3 seconds, the GSM device will temporarily store
the currently formed number. After that, GSM device will make the call to the
currently stored number.
If something goes wrong while device tries to call the selected number (no credits in
SIM Card, SIM Card is not detected), the system will automatically call the
International Emergency Number (112).
When connection is established with the desired number, then ―LINE‖ led will start
blink every 500ms.
Any time the earpiece goes to Hang on state, Call progress is terminated and the
―LINE‖ led while turn off.
Program method:
Conventional telephone device
