PELEKIS ELECTRONICS
29
ISO9001/2015
Rev. 1.04 April 2019
Programming Record Function :
Programming the playback voice messages can be done with 2 different ways. The
first way is, through any conventional telephone device plugged in Line terminal and
the second is through GSM Gateway incoming call.
When program will be done through a conventional telephone device, user should
Hook Off the earpiece and start typing the key sequence according the record process.
Otherwise, program can start after a GSM‘s incoming call has been established.
Choose voice message to record between ―Voice Message 1‖ and ―Voice Message 2‖
by pressing the ―*15*‖ or ―*16*‖ key combination accordingly. If the code is accepted,
device will return a short sound(500ms) after 1 sec..
In this step GSM Gateway is entered the Record Function and cannot serve any other
function. According the bellow table, user can handle the Record Function simply by
pressing keys on the keyboard.
Exiting the record process will determine if the recorded message will be enabled or
disabled.
STEP 1
STEP 2
Keys
Function
“1”
Start and Stop Record
“2”
Play Recorded message
“*”
Enable Message Playback - Exit
“#”
Disable Message Playback - Exit
STEP 3
ENTER The Record function
