PELEKIS ELECTRONICS
25
ISO9001/2015
Rev. 1.04 April 2019
Step 2:
Edit device‘s parameters
Relay Control:
Clicking the ―Relay Control‖ symbol user can Edit or Get the status of the 2 dry
contact relays that are placed on the GSM Device.
In order to Edit the status of the Relays user should swap left or right the swift
button located beside each of the 2 Relays appeared on the screen and then
press the ―Send Message‖ button.
In case we need to get the status of the Relays user need just to press the
―Get Status‖ Button. If GSM Device operates normally a message will appear
on mobile‘s SMS Inbox informing the user about the status of both relays.
NOTE !
Making the Get Status action will not update the user interface with the
current status of the device‘s Relays.
