Patton OnSite 2603 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 131

background image

Introduction

104

Models 2603, 2621, and 2635 User Manual

11

• SNTP Client Configuration

Introduction

The Simple Network Time Protocol (SNTP) Client webpage contains the configurable parameters for either
setting up the SNTP client or, in the absence of an SNTP server, setting the internal clock.

If you plan the use of an SNTP server, you will configure the ‘SNTP Client Mode Configuration Parameters’
and ‘SNTP Client General Configuration Parameters.’ If you are not accessing an SNTP server, you can con-
figure the system clock for a calendar clock setting.

Configuring the SNTP Client

The

“SNTP Client Mode Configuration Parameters”

section is for selecting the synchronization mode and

entering the IP address of the SNTP Server. With the

“SNTP Client General Configuration Parameters”

sec-

tion, you will select the time zone and set the transmit packet timeout period, retries, and polling period.

SNTP Client Mode Configuration Parameters

In this section you configure the synchronization mode and enter the IP address of the SNTP server. The
OnSite supports three synchronization modes: unicast mode, anycast mode, and broadcast mode. Unicast is a
point-to-point mode. Anycast is a multipoint-to-point mode. Broadcast mode is for use when the SNTP server
is on the local network, that is, the same subnet as the OnSite.

When

Unicast mode

is enabled, the OnSite sends a request to the server designated in the field containing the

SNTP server’s IP address. (See

figure 81

.) This is a point to point communication link. The OnSite requests

from one server. The server sends the timing information directly to the OnSite. When disabled, the OnSite
does not send any requests to any SNTP Server.

In

Broadcast mode

, the synchronization is with an SNTP server on the local network. Since routers do not for-

ward broadcast IP addresses, the SNTP server and OnSite must be on the same subnet.

With

Anycast mode

, the OnSite device’s SNTP client sends a request to a designated broadcast address. One or

more SNTP servers may reply with a unicast message to the OnSite. The OnSite communicates with the server
first responding. After this point, the OnSite operates in unicast mode. When

Anycast

is enabled,

Unicast

is

automatically enabled and the IP address of 255.255.255.255 is in the SNTP server’s IP address field.

Anycast

takes precedence over

Broadcast

mode.

The field

Configured IP Address of SNTP Server:

is the IP address of the dedicated unicast server that the SNTP

client will use for synchronization.

Figure 81. SNTP synchronization and server IP address configuration

«
...
102
103
104
105
106
...
»

Содержание OnSite 2603




































































































































Отзывы:

Нет отзывов

Похожие инструкции для OnSite 2603

Бренд: D-Link Страницы: 12

Ethernet Broadband Router DIR-100

Бренд: D-Link Страницы: 70

Бренд: D-Link Страницы: 74

Бренд: D-Link Страницы: 76

myPocket DIR-457

Бренд: D-Link Страницы: 4

Бренд: Maestro Страницы: 4

Бренд: Mafell Страницы: 162

Бренд: Y!mobile Страницы: 2

UniFi UAP-AC-LITE

Бренд: Ubiquiti Страницы: 28

AirStation Nfiniti WZR-AG300NH

Бренд: Buffalo Страницы: 48

iB-WRX300NP Baton

Бренд: iBall Страницы: 66

Бренд: Black Box Страницы: 196

Бренд: I-O Wireless Страницы: 36

Бренд: Ebyte Страницы: 11

Бренд: Ebyte Страницы: 21

Бренд: Ebyte Страницы: 21

Бренд: Ubee Страницы: 89

Бренд: LEGRAND Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды