Patton OnSite 2603 Скачать руководство пользователя страница 2

Страница: 2 / 131

Patton Electronics Company, Inc.

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

Tel: +1 (301) 975-1000

Fax: +1 (301) 869-9293

Support: +1 (301) 975-1007

Web:

www.patton.com

E-mail:

[email protected]

The information in this document is subject to change without notice. Patton

Electronics assumes no liability for errors that may appear in this document.

Warranty Information

The software described in this document is furnished under a license and may

be used or copied only in accordance with the terms of such license.

Patton Electronics

warrants all OnSite Series router components to be free

from defects, and will—at our option—repair or replace the product should it

fail within one year from the first date of the shipment.

This warranty is limited to defects in workmanship or materials, and does not

cover customer damage, abuse or unauthorized modification. If the product

fails to perform as warranted, your sole recourse shall be repair or replacement

as described above. Under no condition shall

Patton Electronics

be liable for

any damages incurred by the use of this product. These damages include, but

are not limited to, the following: lost profits, lost savings and incidental or

consequential damages arising from the use of or inability to use this product.

Patton Electronics

specifically disclaims all other warranties, expressed or

implied, and the installation or use of this product shall be deemed an accep-

tance of these terms by the user.

Note

Conformity documents of all Patton products can be viewed online at
www.patton.com under the appropriate product page.

Содержание OnSite 2603




































































































































Результаты поиска

Содержание OnSite 2603

Отзывы:

Похожие инструкции для OnSite 2603

Бренды по названию

Популярные бренды

Patton OnSite 2603, Руководство пользователя

Результаты поиска

Содержание OnSite 2603

Отзывы:

Похожие инструкции для OnSite 2603

Бренды по названию

Популярные бренды