Patton OnSite 2603, Руководство пользователя

Страница: 68 / 131

Configuring the router 68
Models 2603, 2621, and 2635 User Manual 7 • Security
Configuring the router
The configuration of security assumes that the OnSite router has been configured with a valid IP address for
the Ethernet port so that the user may access the modem via the web page. If the IP address is still the factory
default, go to the section in Chapter 3 entitled IP Address Modification.
In this example the WAN transport between the two OnSite router/Routers will be PPP (routed).
1.
Click on
WAN
under Services Configuration in the OnSite router’s Configuration Menu.
2.
Click on
Create a new service
....
3.
Select
PPP routed
and click on the
Continue=>
button.
4.
For this example, enter
PPP Security Firewall
in the Description field. (See figure 41 .)
5.
Click on
Create
.
Figure 41. PPP routed WAN service for Security Firewall example
6.
Click on Edit in the WAN Connections webpage, and then click on the Edit ‘Ip Interface’ hyperlink.
7.
In the Edit Ip Interface webpage, enter the fields as follows and click on the Create button. (See figure 42 .)
Ipaddr: 192.168.101.1
Mask: 255.255.255.0