Patton OnSite 2603, Руководство пользователя

Страница: 62 / 131

WAN Service Configuration 62
Models 2603, 2621, and 2635 User Manual 6 • WAN Services
4.
Enter the description for the circuit in the Description field. This is a mandatory field. Without a descrip-
tion you cannot create a WAN service. (See
figure 38 .)
Figure 38. Frame Relay routed configuration
– Description: FR routed
– DLCI. Enter DLCI number. Consult with your service provider for the DLCI number required.
– Encapsulation Method. Defines the RFC1490 encapsulation type that will be used by the channel.
Choose the encapsulation method best suited for your network needs from the following options:
– Routed IP (default value)
– Raw
– WAN IP address. Enter the IP address assigned to the WAN port (V.35, X.21, or T1/E1)
– Enable NAT on this interface. In this example leave this option blank
5.
Click the
Create
button.
6.
Go to System Configuration > WAN > Edit (for Frame Relay Routed service) > Edit ‘IP Interface’
7.
Enter the WAN IP Address, in this example = 192.168.164.2, and click on the Create button.
8.
From the ‘IP Interface’ web page, click on
Edit ‘Frame Relay’,
then click on
Edit ‘Frame Relay Channel’
(See
figure 39 .)