Patton electronics 3120 Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 331

Patton electronics 3120 Скачать руководство пользователя страница 76

7 • Dial In

Model 3120 RAS Administrators’ Reference Guide

76

Dial In Modify Default window

Figure 29. V.92 Configuration window

Modify ISDN Configuration

V.110 signaling is a form of ISDN rate adaptation (see figure 29). V.110 is a fixed-frame based rate adaptation
standard that allows lower data rates to be communicated across 64-kbps ISDN.

The following rates are supported: 600, 1200, 2400, 3600, 4800, 7200, 9600, 14400, 19200, 38400, 4800
and 56000. V.110 and its data rate is determined via the bearer capability information element or the lower
layer compatibility information element in the ISDN SETUP message as defined in the Q931 specification

Limitations:

•

56000 only supports PAP and CHAP authentication. All other data rates support text, PAP, or CHAP.

•

56000 only supports a synchronous connection; all other data rates support both synchronous and asyn-
chronous connections.

Note

If V.110 is disabled and a V.110 call comes in, the call will be termi-
nated and V110 disabled will be displayed on the dial-in screen as the
disconnect reason.

V.110 (diV110Enable)

The following options are available (see figure 29):

•

Enable or disable V.110 modem modulation.

•

Enable or disable 56K ISDN connections.

Modify V.92 Configuration

This portion of the Dial In Modify Default window (see figure 29) describes modifying the V.92 Configura-
tion parameters.

V.92 Features (diModemV92Enable)

Enables and disables V92 functionality.

«
...
74
75
76
77
78
...
»

Содержание 3120












































































































































































































































































































































Отзывы:

Нет отзывов