manualshive.com logo in svg

Patton electronics 3120, Справочное руководство администратора, Страница: 244 / 331

Поделиться
Скачать
Patton electronics 3120 Скачать руководство пользователя страница 244

20 • System

Model 3120 RAS Administrators’ Reference Guide

244

System main window

Enclosure System

This portion of the System main window contains information described in the following sections (see 
figure 97 on page 243).

Internal Temperature (boxTemperature)

Displays the current temperature in celsius (centigrade).

Highest Temperature (boxMaxTemperature)

The highest temperature registered in celsius (centigrade) sinc the access server was last re-booted.

Payable features

This portion of the System main window contains information described in the following section (see 
figure 97 on page 243).

Enable Payable Features (boxFeatureEnableKey)

This encoded string is used to enable payable features. This feature is not currently implemented.

Installation

This portion of the System main window contains information described in the following section (see 
figure 97 on page 243).

Country (installCountry)

Specifies the country that the access server is installed in so it can be configured in accordance with local laws.

Other

This portion of the System main window contains information described in the following sections (see 
figure 97 on page 243).

Total DRAM Detected (boxDetectedMemory)

The total number of bytes of DRAM detected by the CPU

SystemID (sysObjectID)

This SNMP variable represents the type of access server being managed as defined by specification RFC 
1213.MIB. 

Running Since Last Boot (sysUpTime)

This SNMP variable represents the time (in hundreds of seconds) since the network management portion of 
the system was last re-initialized, as specified in RFC 1213.

System Manager (sysContact)

This SNMP variable represents the textual identification of the contact person for this managed node, together 
with information on how to contact this person as defined by specification RFC 1213.

Box Name (sysName)

This is an administratively assigned name for this managed node. By convention, this is the node’s fully-quali-
fied domain name, as defined in RFC 1213.

Содержание 3120












































































































































































































































































































































Отзывы:

Нет отзывов