manualshive.com logo in svg

Patton electronics 3120, Справочное руководство администратора, Страница: 291 / 331

Поделиться
Скачать
Patton electronics 3120 Скачать руководство пользователя страница 291

WAN Circuit CONFIGURATION window

291

Access Server Administrators’ Reference Guide 

23 • Sync PPP

Compression (pppDefaultIpCompression)

If none(1) then the local node will not attempt to negotiate any IP Compression option. Otherwise, the local 
node will attempt to negotiate compression mode indicated by the enumerated value. Changing this object 
will have effect when the link is next restarted.

•

 none(1)—do not negotiate Ip compression negotiated

•

 vj-tcp(2)—van-jacobson TCP/IP header compression will be negotiated per RFC 1332.

PPP Link Window

Clicking on the IP address link on the main page will bring up the PPP Link Window. This gives a status of the 
current link.

Figure 121. PPP Link Window

HDLC Statistics on Link

The RAS will report statistics for the HDLC link as described in the following sections.

Link (frDlcmiIfIndex)

The HDLC link management number

Status (framerelStatus)

The status of the HDLC link. If HDLC management has been established for this link the status will be UP.

TRANSMIT(framerelTxOctets)

Transmit rate in bits per second.

Содержание 3120












































































































































































































































































































































Отзывы:

Нет отзывов