Patton electronics 3120 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 331

Patton electronics 3120 Скачать руководство пользователя страница 58

7 • Dial In

Model 3120 RAS Administrators’ Reference Guide

58

Dial In main window

Figure 22. Dial In main window

Dial In main window

The Dial In window displays statistics for individual users. This window shows currently attached users, the
users state, and time that the user has been on access server. This window can also display recently disconnected
sessions. The following sections explain the meaning of each statistic.

Call Sorting (diPageSort)

Change the order of the calls on the screen.

•

Descending—calls are sorted from the latest call at the top to the oldest call at the bottom

•

Ascending—calls are sorted from the oldest call at the top to the latest call at the bottom

Active Calls (diActive)

The total number of active calls and calls that are being initiated.

Peak Active Calls (diMaxActive)

The maximum number of active calls seen at one time since the unit was powered up.

Total Calls (diTotalCallAttempts)

The total number of calls attempted since the last boot of the box.

Call ID (diactIndex)

Unique identification of this active call for internal use.

Call ID (diactIndex)

Subsequent calls in a multilink PPP/ISDN call refer to this ID as a pointer to the bundlehead or originating
call.

ML ID (diactMultiIndex)

Subsequent calls in a multilink PPP/ISDN call have a pointer to the bundlehead or originating call.

User (diactusername)

The user name that the caller entered. This can be a static user or a radius user’s login name.

«
...
56
57
58
59
60
...
»

Содержание 3120












































































































































































































































































































































Отзывы:

Нет отзывов