manualshive.com logo in svg

Patton electronics 3120, Справочное руководство администратора, Страница: 203 / 331

Поделиться
Скачать
Patton electronics 3120 Скачать руководство пользователя страница 203

ICMP

203

Model 3120 RAS Administrators’ Reference Guide 

16 • IP

Figure 82. ICMP window

Click on 

ICMP

 under the 

Configuration Menu

 to monitor access server ICMP statistics (see figure 82).

Block ICMP redirects (boxBLockIcmpRedirects)

Enables you to configure how the access server handles ICMP redirects. Enabling the access server to receive 
redirected messages is generally considered a security breach.

The following options are available:

•

allowredirects(0)

•

stopredirects(1)

ICMP Receive/Send Messages window

The ICMP window displays the ICMP message counters. ICMP messages are displayed in the window as col-
umns comprising two types of messages:

•

Messages received by the access server (InMibVariable)

•

Messages sent by the access server (OutMibVariable)

The numbers following the parameters can be a good source of what is happening on the network to point out 
potential problems. Both gateways (routers) and hosts can send ICMP messages.

Total Received/Sent (icmpInMsgs, imcpOutMsgs)

The number of ICMP messages the access server has received/sent. This number also includes ICMP messages 
received/sent which have ICMP specific errors.

w/Errors (icmpInErrors, icmpOutErrors)

The number of ICMP messages which the access server has received/sent but are deemed to be faulty (for 
example, bad ICMP checksums, bad length, or non-routable errors).

Содержание 3120












































































































































































































































































































































Отзывы:

Нет отзывов