Patton electronics 3092, Руководство по началу работы

Страница: 46 / 74

3 • Configuring the DACS for operation Model 3092 iDSL DACS Getting Started Guide
46 Saving your configuration
Configuring the line settings
1. Click on the
Line Type
pop-up menu (see figure 26 on page 45) and choose either dsx1EX(4) or dsx1E1-
CRC(5).
2. Click on the
Line Coding
pop-up menu (see figure 26 on page 45) and choose either dsx1AMI(5) or
dsxHDB3(3). Most installations will use HDB3.
3. Click on the
Line Build Out
pop-up menu (see figure 26 on page 45) and select e1pulse(1).
4. Click on
Submit Query
.
At this point, the WAN front panel LEDs will become active. A solid green FRAME light indicator means that
the DACS has synchronized with the E1 line. If the E1 line is not connected to the 3092, you will see Alarms
on that WAN port. These should disappear upon connecting the E1 line to the WAN port on the rear of the
Model 3092.
Configuring line settings and signaling for T1
1. Select T1/E1 Link on the Configuration Menu . The T1/E1 Link Activity window appears (see figure 25 on
page 45).
2. Link: 1 corresponds to Line 1 on the DACS. Under Link 1, Click on Configuration then Modify . The Line
Interface Settings section of the WAN Circuit Configuration window appears (see figure 26 on page 45).
Configuring the line settings
1. Click on the
Line Type
pop-up menu (see figure 26 on page 45) and choose from the following options:
– dsx1ESF Extended SuperFrame DS1
– dsx1D4 AT&T D4 format DS1
2. Click on the Line Coding pop-up menu (see figure 26 on page 45). The most common options are:
dsx1B8ZS and dsx1AMI.
3. Click on the Line Build Out pop-up menu (see figure 26 on page 45) and select t1pulse0dB(1).
4. Click on
Submit Query
.
At this point, the WAN front panel LEDs will become active. A solid green FRAME light indicator means that
the DACS has synchronized with the T1 line. If the T1 line is not connected to the 3092, you will see Alarms
on that WAN port. These should disappear upon connecting the T1 line to the WAN port on the rear of the
Model 3092.
Saving your configuration
The basic configuration for the DACS is now finished. Do the following to save your configuration settings:
1. Select
Home
on the
Configuration Menu
. The Home window appears (see figure 19 on page 37).
2. Click on the
Record Current Configuration
button (see figure 21 on page 39).
Note
Failing to click on the
Record Current Configuration
button before
you power down or reset the DACS will cause your changes to be
lost.