Patton electronics 3092 Скачать руководство пользователя страница 32

Страница: 32 / 74

3 • Configuring the DACS for operation

Model 3092 iDSL DACS Getting Started Guide

Introduction

Introduction

This chapter contains the following procedures for configuring the Model 3092 DACS for operation:

•

“Configuration prerequisites: Preparing for the configuration”—lists the items you need to have on hand
before configuring the DACS.

•

“Initial Configuration through the RS-232 Control Port” on page 33—describes setting up the 3092’s LAN
IP address and netmask parameters.

•

“Using a Web browser to complete Model 3092 configuration” on page 36—describes the process to com-
plete the software installation parameters—that is, to bring it on line. The steps are:

Setting Static Connections with DS0 Mapping

Setting the System Clock Source

iDSL Modem Activation

IP Default Gateway

T1/E1 WAN Links

•

“Saving your configuration” on page 46—tells you how to save the configuration settings.

•

“Completing the installation” on page 49—describes testing the DACS to verify that it is fully operational.

Configuration prerequisites: Preparing for the configuration

You will need the following to configure the DACS:

•

A PC that includes the following:

RS-232/V.24 serial port

VT-100 terminal program, such as HyperTerminal

Ethernet port

Web browser (for example, Netscape Communicator or Microsoft Internet Explorer)

•

You will need the following information to configure the Model 3092:

The IP address and subnet mask for the 3092’s Ethernet port

The IP address of the default gateway

The 3092 iDSL port each customer premises equipment (CPE) iDSL modem will be using

Whether each CPE iDSL modem will be using one or two of the B-channels (DS0, 64-kbps channels)

The final destination of the CPE’s iDSL modem connection

•

If you are using a T1 WAN line, you will need the following information from the telephone company
(central office):

Line Type: either ESF or D4

Line Coding: either B8ZS or AMI

•

If you are using a E1 WAN line, you will need the following information from the Telco:

Содержание 3092











































































Результаты поиска

Содержание 3092

Отзывы:

Похожие инструкции для 3092

Бренды по названию

Популярные бренды

Patton electronics 3092, Руководство по началу работы

Результаты поиска

Содержание 3092

Отзывы:

Похожие инструкции для 3092

Бренды по названию

Популярные бренды