Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
Lifting Assembly
Main Lift Cylinder Mounting Assembly
2
1
Outer Support
Bearing Mount Left Side Assembly
1
2
Outer Support
Bearing Mount Right Side Assembly
1
3
Gator Clamp Idler Weldment
CS-A003
2
4
Hex Bolt
B1/2x4.5
16
5
Nylock Nut
N1/2NYL
16
6
Minden Machine Shop Inc.
1302 K Road Minden, NE
800-264-6587 / 308-832-0220
Standard Mount Assembly
Contains
Main Lift Cylinder Assembly
Left and Right Bearing Mount
4
4
1
1
5
6
3
2
The standard mount assembly is the base mount for all of the crop sweepers
except for Geringhoff corn heads. Geringhoff cornhead installation
instructions are later in this manual. To begin with installation of the crop
sweeper:
1.
Find and mark the center location of the the corn head. This will be the
base meaurement for the installation.
2.
It will be useful to mark the locations of the crop sweeper pivot arms at
this time.
3.
The first to be mounted will be the main lift cylinder mount (Item 1)
and the outer bearing mounts (Item 2) to the main upper back beam of
the corn head. Mounting these items can vary on the back of the head
so that they will miss obstructions. The support and bearing brackets
can be placed where they best fit. The locations can be interchanged.
Make sure not to interfere with planned arm locations.
Crop Sweeper V 10.0
22
