Operation
DANGER!
Make sure everything and everyone is clear of the Crop
Sweeper and the combine before operating!
1.
Have the fore and aft in the back position when starting the CROP SWEEPER.
2.
Lift the CROP SWEEPER hydraulics so that the reel is about a foot above the gathering chains.
3.
Engage the combine to run and then move the feeder house switch to the on position and the
CROP SWEEPER will start.
4.
Once the combine is running to speed, adjust the rotational speed of the CROP SWEEPER
paddles with the reel dial-o-matic switch on the combine console.
5.
In the field, adjust the CROP SWEEPER up or down according to crop conditions.
6.
If the crop is down and will not slide over the snouts, adjust the paddles out using the fore and aft
feature and then lower the CROP SWEEPER, being careful to avoid contact with the head.
7.
If the corn slides up and over the snouts, bring the CROP SWEEPER back so that the paddles
run right behind the rubber ear saver.
8.
In extreme down conditions, removing the rubber ear savers may improve crop flow into the
combine head. The CROP SWEEPER may also be lowered.
9.
In all situations, run the height of the CROP SWEEPER wherever it best improves crop flow.
10.
On standing corn or in fluff run the CROP SWEEPER about ear high with the paddles running
slowly to keep the trash and fluff moving into the auger and feeder house.
11.
When the CROP SWEEPER is not in use, move it to a position that allows for the best visibility
for the combine operator.
12.
Transport the CROP SWEEPER in the down position.
13.
When working under the Crop Sweeper or when transporting it in the up position,
always
install
the safety lock pins that are provided to prevent the reel from dangerously coming down!
Crop Sweeper V 10.0
11
