Machine Inspection
After delivery of your new Crop Sweeper and/or completion of assembly, and before each use,
inspection of the machine is mandatory. This inspection should include, but not be limited to:
1. Check to see that all guards are in place, secured and functional.
2. That all fasteners are tight.
3. That all Hydraulic lines are free from leaks and defects.
4. That all electronics are working properly and wires are in good condition.
Lighting and Marking
It is the responsibility of the customer to know the lighting and marking requirements of the local
highway authorities and to install and maintain the equipment to provide compliance with the
regulations. Add extra lights when transporting at night or during periods of limited visibility if
necessary.
Serial Number
To ensure efficient and prompt service, please furnish us with the model and serial number of your Crop
Sweeper in all correspondence or other contact. The serial number is located on the hydraulic motor
plate.
Safety Decals
1.
Keep safety decals clear and legible at all times.
2.
Replace decals and signs that are missing or have become unreadable.
3.
Safety signs are available from your Dealer or the Manufacturer.
How to install Safety Decals
1.
Be sure that the installation area is clean and dry.
2.
Decide on the exact position before you remove the backing paper.
3.
Align the decal over the specified area and carefully press the small portion with the exposed
sticky backing in place.
4.
Slowly peal back the remaining paper and carefully smooth the remaining portion of the decal in
place.
5.
Small air pockets can be pierced with a pin and smoothed out using a piece of decal backing
paper.
Crop Sweeper V 10.0
7
