Partlow MRC 7800, Инструкция по установке, монтажу и эксплуатации.

Страница: 31 / 57

P
AGE
31
TABLE 4-5 PRESET ADJUST MODE CONFIGURATION
Depress the SCROLL key until PSA is displayed. With PSA displayed, press the DOWN key
to enter the Preset Adjust mode. PS1H will be displayed in the upper display, assuming it has
been selected in the Program mode. When the SCROLL key is depressed, the value will be
displayed. The UP and DOWN keys can now be used to increment or decrement the dis-
played value by a factor of ten thousand (10,000) per depression (ignoring the decimal point).
When the SCROLL key is depressed again, PS1L will be displayed. When the SCROLL key
is depressed again, the value will be displayed again. The UP or DOWN keys can now be
used to increment or decrement the value by one (ignoring the decimal point). After adjusting
a parameter, depress the SCROLL key to proceed to the next parameter. After all selections
have been made, depress the UP key with a parameter in the display (not a setting) to exit the
mode
1 Preset 1 High Value PS1H 0 to 99999999 units 5000
Increment/Decrement
value by 10000
Preset 1 Low Value PS1L 0 to 99999999 units
Increment/Decrement
value by 1
2 Preset 2 High Value PS2H 0 to 99999999 units
10000
Increment/Decrement
value by 10000
Preset 2 Low Value PS2L 0 to 99999999 units
Increment/Decrement
value by 1
3 Preset 3 High Value PS3H 0 to 99999999 units
15000
Increment/Decrement
value by 10000
Preset 3 Low Value PS3L 0 to 99999999 units
Increment/Decrement
value by 1
Note: Upon a sensor error condition (SnSr), the preset outputs will remain in the state
they were in upon entering the error condition.
DISPLAY AVAILABLE FACTORY YOUR
STEP DESCRIPTION CODE SETTINGS SETTING SETTING