Partlow MRC 7800, Инструкция по установке, монтажу и эксплуатации.

Страница: 13 / 57

P
AGE
13
FIGURE 2-7B
Relay Output (SPDT)
FIGURE 2-8
SSR Driver Output
Connections are made to relays H through A as shown. Terminal connections are made
using TB9, TB8, etc. depending on the number of SSR Driver outputs specified.
FIGURE 2-9
Current Output
Connections are made to standard current outputs A through D as shown. Each current
output is programmable as either 4 to 20mADC or 0 to 20mADC. Each output must be
assigned to the desired function (refer to Table 4-2, page 26, for details). Terminal connec-
tions are made using TB10 through TB13 for current output A through D respectively. Con-
nect positive lead (+) to terminal 1 and the negative lead (-) to terminal 2. Current outputs will
operate up to 650 ohms maximum load.
1 2 3
LOAD
POWER
HOT
TB6 OR TB7
NEU
5 AMPERES
MAXIMUM
AT 115 VAC
N.O C N.C
1 2 3 4
SSR
+ -
TB6 THRU TB9
SOLID STATE RELAY
1 2
SHIELDED
TWISTED
PAIR
LOAD
+ -
650 OHMS
MAXIMUM
+ -