Chapter 1: Introduction
Getting Started
PHM/PM User Guide
1-4
Technical Training
Parker Automation offers training on our products, either at Parker in our
state-of-the-art training facility, or at your site. Some product training is
only conducted based on specific customer requests.
You can contact the Training Coordinator by telephone or e-mail:
•
Telephone: 800-358-9070
•
E-mail CTC Training: [email protected]
You can view a current training schedule on our web site at
www.parkermotion.com.
Getting Started
Now that you have opened the monitor package, you are ready to unpack
the unit and install it in a permanent location. Follow the steps below to get
started.
1
Unpack the monitor and verify that you have received all of the
components you ordered.
2
Install the monitor in a permanent location. See Chapter 2, Installing
the Monitor, for complete installation instructions.
3
Connect the monitor to a computer—either to a PowerStation or
another computer supporting an analog video or DVI-D output
connector. See Chapter 3, Connecting to a Computer for more
information
4
Start up your system and follow the detailed instructions for setting
up the monitor described in Setting Up the Monitor on page 3-4.
