PHM/PM User Guide
A -1
Monitor Specifications
A
This appendix outlines important specifications for the monitor. It is a good
idea to familiarize yourself with these specifications before operating the
monitor.
Physical Specifications
The monitor’s physical specifications are listed in the table below.
The monitor’s cutout dimensions are listed in the table below.
Table A-1: Physical Specifications
Category
Specifications
Dimensions
(H x W x D)
• 15” Monitor (with stainless steel bezel) — 13.3” x 16.8” x 3.1”
(338mm x 427mm x 77.9mm)
• 15” Monitor (with standard bezel) — 13.3” x 16.8” x 3.5”
(338mm x 427mm x 89.6mm)
• 17” Monitor (with standard bezel) - 15.7” x 18” x 3.2”
(399mm x 457mm x 80.5mm)
I/O Ports
• Analog Video Input — Analog RGB through a standard 15-pin
DSUB connector.
• Digital Video Interface Input - DVI-D or DVI-I compatible
connector for high quality digital input. (PHM monitor only)
• Serial Touchscreen output — Serial RS232 (DCE) through a
standard 9-pin DSUB connector.
• USB Touchscreen output - standard USB output. (PHM monitor
only)
Weight
• 15” Monitor (with stainless steel bezel) - 14.4 lbs. (6.5Kg)
• 15” Monitor (with standard bezel) - 11.2 lbs. (5.1Kg)
• 17” Monitor (with standard bezel) - 17.9 lbs. (8.1Kg)
Touchscreen
• Analog Resistive
Table A-2: Cutout Specifications
Monitor Size
Cutout Height
Cutout Width
15” (stainless steel bezel)
12.40” (315mm)
15.90” (404mm)
15” (standard bezel)
12.40” (315mm)
15.90” (404mm)
17” (standard bezel)
14.26” (362mm)
17.06” (433mm)
