Chapter 2: Installing the Monitor
Installing the Monitor
PHM/PM User Guide
2-7
Installing the Monitor
Once you have prepared the location for your monitor, you are ready to
install the unit. To do so, you need to mount the monitor to your enclosure
using screws and metal clamps in what is called a bracket assembly. The
bracket assembly contains a mounting clamp with “feet”, a screw, and a
nut.
The mounting clamps secure to the monitor using a sliding mechanism.
You must slide the feet of the mounting clamp into the appropriate slot on
the monitor.
For your convenience, all necessary mounting hardware is included with
the unit.
Figure 2-3 and 2-4 display the bracket assembly and mounting clamp.
Figure 2-3: Bracket Assembly
The bracket assembly contains a mounting clamp with “feet” as shown in
Figure 2-4. The mounting clamps secure to the monitor using a sliding
mechanism. You must slide the feet of the mounting clamp into the
appropriate slot.
Figure 2-4: Mounting Clamp
To mount the monitor properly, refer to the chart on the next page that
corresponds with the display size you are using. General mounting steps
are listed below the chart.
Nut
Mounting Clamp
Feet
