Chapter 2: Installing the Monitor
Installing the Monitor
PHM/PM User Guide
2-8
Figure 2-5Mounting Chart for Monitors
Mounting the Monitor
1
Slide the monitor into the cutout from the front.
2
Attach the mounting clamps, with their screws to the back of the
monitor in the spaces provided. Ensure you use all the clamps
included in your assessories kit. Refer to the chart, above, to locate
the number of clamps in your kit.
3
The clamps secure to the monitor using the sliding mechanism shown
in the chart and figure 2-6.
4
Insert the clamp into the wide end of the slot and slide it to the thin
end.
5
Tighten each of the mounting screws against the front of the
enclosure.
6
Depending on your display size, torque down the screws to the value
indicated in the chart. Also refer to figure 2-6.
Caution: Do not over-tighten the screw/clamp assembly or you
may damage the monitor. However, under-tightening
may not guarantee a NEMA 4/4x seal.
7
Tighten the screws in a crosswise sequence to ensure a good seal
and prevent damage. You may see a small gap between the bezel
and the enclosure.
