Parker AC30V Series, Руководство по эксплуатации продукта

Страница: 118 / 414

9-2
Setup Wizard
AC30V series Variable Speed Drive
Application selection
Selection of the specific Macro and associated parameters.
PNO Parameter Validity Comment
Setup Application? Select YES to configure the application parameters, NO to skip this section
1900 Selected Application
BA
SI
C SP
EED
CONTR
OL
AUTO/MA
N
U
AL
CONTR
OL
SP
EE
D
RAIS
E/
LOWE
R
SP
EE
D
PRES
ETS
PROC
ES
S
PI
D
1937
Disable Coast Stop ● ● ● ● ●
1938
Disable Quickstop ● ● ● ● ●
1901
RL Ramp Time ● Sets the rate of change of the output of the Raise/Lower ramp.
1902
RL Reset Value ● The value of the Raise/Lower ramp output when reset.
1903
RL Maximum Value ● The upper limit of the Raise/Lower ramp output.
1904
RL Minimum Value ● The lower limit of the Raise/Lower ramp output
1916
Preset Speed 0 ● The preset speed output when the selected preset is 0.
1917
Preset Speed 1 ● The preset speed output when the selected preset is 1.
1918
Preset Speed 2 ● The preset speed output when the selected preset is 2.
1919
Preset Speed 3 ● The preset speed output when the selected preset is 3.
1920
Preset Speed 4 ● The preset speed output when the selected preset is 4.
1921
Preset Speed 5 ● The preset speed output when the selected preset is 5.
1922
Preset Speed 6 ● The preset speed output when the selected preset is 6.
1923
Preset Speed 7 ● The preset speed output when the selected preset is 7.
1926
PID Setpoint Negate ● Changes the sign of the setpoint input.
1927
PID Feedback Negate ● Changes the sign of the feedback input.
1928
PID Prop Gain ● The proportional gain of the PID controller.
1929
PID Integral TC ● The integral time constant of the PID controller.
1930
PID Derivative TC ● The derivative time constant of the PID controller.
1931
PID Output Filter TC ● The time constant of the first order filter used to filter the PID output.
1932
PID Output Pos Limit ● The maximum positive excursion, (limit), of the PID controller.
1933
PID Output Neg Limit ● The maximum negative excursion, (limit), of the PID controller.
1934
PID Output Scaling ● The overall scaling factor which is applied after the positive and negative limit
clamps