13
The 6911 Keypad
NOTE
A different naming convention is applied in the OPERATOR menu for these parameters when
displayed as the first parameter entry:
•
REMOTE SETPOINT is displayed as SETPOINT (REMOTE)
•
LOCAL SETPOINT is displayed as SETPOINT (LOCAL)
•
COMMS SETPOINT is displayed as SETPOINT (COMMS)
•
JOG SETPOINT is displayed as SETPOINT (JOG)
Pressing the L/R Multi-Key when in Remote mode takes you directly to the SETPOINT (LOCAL)
parameter with the Edit mode enabled. Press the PROG key to return to the previous display.
F3 : PROG
(This key does not function on 650 drives). The
PROG
Multi-Key toggles between the OPERATOR
menu and any other menu, remembering and returning to previous positions in each menu. As you
press the
PROG
Multi-Key, the title of the menu you are about to enter is displayed, i.e. OPERATOR
or for example DIAGNOSTICS. Releasing the key clears the display and releases you into that menu.
Holding the PROG key for approximately three seconds will take you to the SYSTEM::SAVE
CONFIG menu.
F4 : NEXT MENU
Press this key to display next Multi-Key menu set.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
