16
The 6911 Keypad
Options Set-Up Page
Option Label
Text
Optional
Settings
Default
Setting
Explanation
Time
Display
OFF
24HR,
24HR+1
SET
24HR
This option adjusts the format and visibility of the
real-time clock. Select ‘SET’ to adjust the time
and date in the pop-up menu.
24HR+1 shows time adjusted for daylight, but
does not act upon file time stamping.
Backlight
0 – 9
AUTO
9
This option sets the brightness of the display
backlight, allowing you to match display
brightnesses within a system:
0 = OFF; 1=30%; 9 = 100%; AUTO changes
from 1 to 9 on key (or encoder) activity, timing
out after 30 seconds, considerably extending the
working life of the MMI backlight.
B/L Flash
OFF
ON
OFF
This option causes the display backlight to flash
whenever the "OK" (health) LED flashes providing
a high visibility alert. It stops flashing when the
"OK" LED stops flashing, or at the first press of
any key.
Timeout
OFF
VIEW
OFF
This option adjusts the display after 30 seconds
of key (or encoder) inactivity:
VIEW :
displays the bitmap timeout-screen
until the next key press
Large Text
OFF
ON
ON
This option enables large text for the primary
parameter/diagnostic value, where possible.
Rotary Adj
OFF
ON
ON
This option allows the rotary control action to be
disabled on the drive menus.
ON = ENABLED OFF = DISABLED
Disable the rotary control to prevent accidental
changes, for example: during datalogging.
Multi-Key Set 2 (L/R & PROG) are replaced with
ST
keys (compatible with the 650 drive).
Caution:
Always disable the rotary
control after drive
commissioning if its
accidental rotation would
cause an unwanted
adjustment or action.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]