15
The 6911 Keypad
Note: AUTO, FR, GR, SP
& IT are not yet available.
Options Set-Up Page
Option Label
Text
Optional
Settings
Default
Setting
Explanation
MMI Version
(read only)
not
applicable
The display shows the firmware code version
running in the MMI.
MMI
Language
UK
AUTO, FR, GR,
SP, IT
UK
This option selects the display language. The
AUTO setting uses the language of the host
drive. (It is not reset when an MMI firmware
upgrade is performed)
Connection
RS232
RS485
RS232
This option selects the MMI's mode of
communicating with the drive (or drive system).
RS232: requires a P3 lead connection to a
single
drive
RS485: requires a 2-wire connection between
the MMI's RS485 terminal and a drive
using an RS485/RS232 converter
Leave setting at RS232 for MMIs without RS485
functionality. See Caution opposite.
Config Mem
INT
TO MC
INT
This option selects the source/destination for
transferring configuration files (or clone) between
the drive and the MMI.
INT:
transfers are between the drive and
the MMI's internal EEPROM.
TO MC: transfers are between the drive and
the MMI's Memory Card (option only
offered if memory card is present).
Tip: If the MC file mode cannot be entered, the
memory card is unusable. Try another one.
Only upload configuration files.
Caution:
Stop the drive (system)
before making any changes
to the mode of
communication.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
