17
The 6911 Keypad
F3 : RS485 PAGE
(not yet available)
With the Multi-Keys displaying SET3, press the "'485" Multi-
Key to enter the RS485 Set-Up page.
The menu displays 15 drive names. In an RS485 system
comprising several drives, the Keypad will control the
selected drive (indicated by the arrow on the right of the
screen). By default, 01 is selected. This number is the UID
(Unit Identity Address).
Set the UID of each drive in the system to a unique value
from 1 to 15. (The default value of UID for all Parker SSD
drives is 0).
Drive
Value
Parameter Address
605
Decimal SETUP PARAMETERS::FUNCTION BLOCKS::SERIAL LINKS::
SYSTEM PORT (P3)::UNIT ID (UID)
650 1-3
650V C-F
Decimal CELITE : SETUP::COMMS PORTS::COMMS ADDRESS
Keypad : SET::SERL::SE03
690+ Decimal
SETUP::COMMUNICATIONS::SYSTEM PORT (P3)::UNIT ID (UID)
590+
Hex
SERIAL LINKS::SYSTEM PORT P3::P3 SETUP::BISYNCH SUPPORT::UNIT ID (UID)
890
Keypad control via RS485 is not available on this drive.
NOTE
Use the RS232 connection mode (P3 lead) when configuring the RS485 addressing, otherwise any
address changes will interrupt the drive communication.
Caution:
Stop the drive (system)
before configuring the
RS485 PAGE
.
Only drive alerts that affect
the drive's health status will
interrupt this configuration
page.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
