32
The 6911 Keypad
Returning the Unit to Parker SSD Drives
Please have the model number, serial number and details of the fault to hand. Contact your nearest Parker SSD Drives Service
Centre to arrange return of the item.
You will be given a
Returned Material Authorisation.
Use this as a reference on all paperwork you return with the faulty
item. Pack and despatch the item in the original packing materials; or at least an anti-static enclosure. Do not allow packaging
chips to enter the unit.
Disposal
This product contains materials which are consignable waste under the Special Waste Regulations 1996 which complies with
the EC Hazardous Waste Directive - Directive 91/689/EEC. We recommend you dispose of the appropriate materials in
accordance with the valid environmental control laws. The following table shows which materials can be recycled and which
have to be disposed of in a special way.
Material
Recycle
Disposal
metal yes
no
plastics material
yes
no
printed circuit board
no
yes
battery
no
yes
The printed circuit board should be disposed of in one of two ways:
1.
High temperature incineration (minimum temperature 1200
°
C) by an incinerator authorised under parts A or B of the
Environmental Protection Act
2.
Disposal in an engineered land fill site that is licensed to take aluminium electrolytic capacitors. Do not dispose of in a
land fill site set aside for domestic waste.
The Lithium Manganese Dioxide (LiMnO2) battery should be fully discharged (or the terminals must be taped or capped to
prevent short circuit) and taken for treatment and recycling to a designated collection centre, in accordance with the EU
Battery Directive.
Packaging
During transport our products are protected by suitable packaging. This is entirely environmentally compatible and should be
taken for central disposal as secondary raw material.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
