7
The 6911 Keypad
Control Keys and LED Indications
Control Key Definitions
RUN
STOP/
RESET
ROTARY
CONTROL
Control
- Runs the
motor at a speed
determined by the
LOCAL SETPOINT
or REMOTE
SETPOINT
parameter.
Trip Reset
- Resets
any trips and then
runs the motor as
above. Only operates
when the drive is in
Local Start/Stop
(Seq) mode.
Control
- Stops the
motor. Only operates
when the drive is in
Local Start/Stop
(Seq) mode.
Trip Reset
- Resets
any trips and clears
displayed message if
trip is no longer
active.
650 Drive only
-
press and hold to
toggle between
Local and Remote
control modes
Programming
-
(Endless) turning
of the rotary control
increments/
decrements
parameter values,
or acsends/descends
menu lists
The rotary control is
also a push-switch. It
is used to select
parameters and/or
menus.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]
