Paravan PR Heavy Duty Скачать руководство пользователя

Страница: 30 / 74

Gener

Information

epar
e

Use

Help

Technology

Gener

Information

epar

Use

Help

Technology

Use of the special orthopaedic seat

11.1.2 Setting the head support

If you need the head support position to be change, you can adjust the

height of the head support to your individual needs in 5 stages.

You have the following settings available:

Adjusting head inclination:

›

Push the head support



into the required inclination

→

push the head support up backwards or forwards.

Height adjustment in five stages:

›

Push the head support



into the required stage

→

pull the head support upwards or push it downwards. The

head supports



have five stages.

In order to remove the head support (e.g. at the hairdresser) you must

pull it up over the final stage and pull it free. Do the same in reverse to

replace it.

Fig. 19: Head support

11.

Use of the special orthopaedic seat

11.1

Setting the back support

Fig. 18: Rückenlehnenwinkel

The back support and the back support angle can be changed manually.

Optionally, the back support and the back support angle can be changed

electrically using the PARAVAN control.

›

Menü in der Steuerung anwählen.

›

Einstellung vornehmen.

)

siehe Kapitel „16 Steuerung“

11.1.1 Setting the back support angle

Содержание PR Heavy Duty











































































Результаты поиска

Содержание PR Heavy Duty

Отзывы:

Похожие инструкции для PR Heavy Duty

Бренды по названию

Популярные бренды

Paravan PR Heavy Duty, Руководство пользователя

Результаты поиска

Содержание PR Heavy Duty

Отзывы:

Похожие инструкции для PR Heavy Duty

Бренды по названию

Популярные бренды