Gener
al
Information
Pr
epar
e
Use
Help
Technology
Gener
al
Information
Pr
epar
e
Use
Help
Technology
Settings on your electric wheelchair; electronic
Settings on your electric wheelchair; electronic
50
51
10.4.3 Setting the foot rest angle
The angle of the foot rests can be set separately for each foot rest to
match your individual needs.
The following settings are available:
›
Screw the adjustment screw inwards -> the foot rest is lowered.
›
Screw the adjustment screw outwards -> the foot rest is raised.
L
L
Do not force the adjustment screw in or out. Raise the foot
rest a little to remove pressure on the adjustment screw.
Take the following steps in the following sequence when setting the
angle of the foot rest:
›
Raise the foot rest
.
›
Loosen the lock nut
.
›
Screw the adjustment screw
in or out as required.
›
Check your setting (lower the foot rest).
›
Tighten the lock nut
to about 8 Nm.
Fig. 17: Foot rest angle
10.4.2 Setting the tibialis angle
Fig. 16: Tibialiswinkel
The projection of the lower leg and of the tibialis angle (between the up-
per and lower leg) can be made using the angle setting of the PARAVAN
control, depending on how your model is equipped. (optional)
›
Select the menu in the control.
›
Make your setting.
)
)
See Section “16 Controls
L
L
Optional accessory:
Not tested with DAHL docking system
