Paravan PR Heavy Duty Скачать руководство пользователя

Страница: 46 / 74

Gener

Information

epar
e

Use

Help

Technology

Gener

Information

epar

Use

Help

Technology

Loading and transporting your electric wheelchair

15.6.4 Securing the wheelchair in the docking station

›

Maneuver the wheelchair slowly and in a uniform direction over the docking station. The lock plate under

the wheelchair helps to guide the wheelchair into place in the docking station. When the lock plate is fully

engaged in the docking station, a spring-action locking pin automatically secures the lock plate.

›

The docking station is equipped with a control switch that indicates whether the lock plate is correctly se-

cured in the docking station. As soon as the lock plate comes into contact with the locking pin, a warning

tone will sound (a high-pitched howl), and the red diode/lamp (LED) in the control panel will light up until

the lock plate is either fully engaged or else the wheelchair is removed from the docking station.

›

As an indication that the wheelchair is properly secured, the warning tone will cease, the red lamp (LED) in

the control panel will go out and the green lamp (LED) will light up.

›

Do not forget to buckle up for driving.

)

Please refer to Dahl Engineerings installation and user guide for height

adjustable VarioDock™ system.

DANGER

Potential risk of injury or serious injury or death! Do not move

the vehicle:

›

Whilst the wheelchair is being maneuvered into position in

the docking station

›

If the wheelchair and user are not correctly secured.

›

If the warning tone sounds and/or the red warning lamp

(LED) in the control panel flashes or is lit!

Always check if the lock plate is properly engaged in the

docking station by trying to reverse the wheel chair out of the

docking station before moving the vehicle. (It must not be pos

sible to reverse out of the docking station without pressing the

red release button in the control panel).

Содержание PR Heavy Duty











































































Результаты поиска

Содержание PR Heavy Duty

Отзывы:

Похожие инструкции для PR Heavy Duty

Бренды по названию

Популярные бренды

Paravan PR Heavy Duty, Руководство пользователя

Результаты поиска

Содержание PR Heavy Duty

Отзывы:

Похожие инструкции для PR Heavy Duty

Бренды по названию

Популярные бренды