Paravan PR Heavy Duty Скачать руководство пользователя

Страница: 68 / 74

Gener

Information

epar
e

Use

Help

Technology

Gener

Information

epar

Use

Help

Technology

Technical equipment

Systems and technical documentation

124

125

22.

Systems and technical documentation

22.1

How to deal with closed accumulators

Where accumulators are completely enclosed, the oxygen liberated at the positive electrode by water decom-

position is channelled via a glass fibre mat from the positive to the negative electrode and finally converted

back into water at the end of a series of chemical reactions. During charging, a proportion of that oxygen

leaks into the common gas area. With closed accumulators, the housing of the accumulator is designed

to hold in the pressure by stronger walls in order to prevent the short-term excess oxygen from escaping

before being fully recombined at the negative electrode. Where charging is done improperly, hydrogen will

be emitted as well as oxygen at the negative electrode. This hydrogen will not be converted into water but

may escape through the safety valve if a threshold excess pressure is reached, possibly reaching the oxygen

contained in the gas space.

If you avoid improper charging, no water is lost by enclosed accumulators and the accumulators are entirely

maintenance-free. During storage and energy consumption there is no oxygen in the gas space and the ac-

cumulator will be under a negative pressure. Any valve release should be avoided in all circumstances, since

oxidation will occur on the negative electrode if atmospheric oxygen enters the system. This leads to irrepa-

rable damage, up to and including total failure of the accumulator.

21.2

Replacement parts

The replacement of original parts by third-party components or by reproduction (copied) original

parts is strictly forbidden! Obtain your spare parts exclusively from your dealer or from PARAVAN

GmbH.

)

See Section "1.1 Your manufacturer"

WARNING

Danger

of personal injury when operating the electric wheel-

chair in a state not conforming to its state upon delivery.

Material damage

to the electric wheelchair through non-au-

thorised or incorrectly installed components.

›

Do not make any technical changes to your electric wheel-

chair.

›

Only operate your electric wheelchair in its original state

upon delivery.

›

Use only original or authorised replacement parts.

Содержание PR Heavy Duty











































































Результаты поиска

Содержание PR Heavy Duty

Отзывы:

Похожие инструкции для PR Heavy Duty

Бренды по названию

Популярные бренды

Paravan PR Heavy Duty, Руководство пользователя

Результаты поиска

Содержание PR Heavy Duty

Отзывы:

Похожие инструкции для PR Heavy Duty

Бренды по названию

Популярные бренды