Paravan PR Heavy Duty Скачать руководство пользователя

Страница: 64 / 74

Gener

Information

epar
e

Use

Help

Technology

Gener

Information

epar

Use

Help

Technology

Electrical system

116

117

20.9

Changing your accumulators

Abb. 81: Power connection

If it should become necessary to replace the accumulators in

your electric wheelchair, let your service technician or dealer do

the work in order to guarantee the safe function or your electric

wheelchair.

›

Move the lift arm upwards.

›

Remove cladding.

)

See Section "12 Removing and reattaching the chassis clad-

ding"

›

Disconnect power connection



›

Disassemble the accumulators: Remove the accumulators from the

battery casing using the hand straps provided.

›

Transfer the remaining part of the power connection



onto the

new accumulator.

›

Place the new accumulator in the battery casing.

›

Reconnect the power connection



›

Re-attach cladding.

›

Execute a functional check.

Abb. 82:

Refitting, accumulator

20.8

Notes on accumulators

The enclosed accumulators should never be opened. Opening the accumulators will cause irrepara-

ble damage to these components, possibly resulting in a complete loss of energy supply.

)

See Section "22.1 Dealing with closed accumulators"

The accumulators should always be recharged using the supplied recharging device after every spell

of use (even if use of charge was minimal during the spell). Always connect the recharger when

the electric wheelchair is not in use. The recharger supplied switches automatically to "maintain

charge", thus guaranteeing you that your accumulators in your electric wheelchair will always be

ready for use and fully charged. If the accumulators are left in an uncharged state for too long they

will become deeply discharged and will no longer be capable of recharging and/or will need to be

replaced.

)

See Section "20.10.2 The charging device"

Observe the relevant regulations on waste disposal when disposing of the accumulators. Please

consult the local or municipal authorities responsible for this issue or talk directly to a waste disposal

company.

)

See Section "19 Disposal and environmental protection"

Содержание PR Heavy Duty











































































Результаты поиска

Содержание PR Heavy Duty

Отзывы:

Похожие инструкции для PR Heavy Duty

Бренды по названию

Популярные бренды

Paravan PR Heavy Duty, Руководство пользователя

Результаты поиска

Содержание PR Heavy Duty

Отзывы:

Похожие инструкции для PR Heavy Duty

Бренды по названию

Популярные бренды