Paragon Fires 2000 Plus Xtra, Руководство владельца

Страница: 5 / 28

LT5048 (Iss 9: 11/12)
5
PARAGON 2000 Plus Users Instructions
SECTION THREE Fuel Bed Cleaning and Layout
Important: -
Refer to the ‘Health & Safety Notice located on page 3 of
this booklet before cleaning or replacing any refractory material.
The fuel bed components are delicate and they should be handled with great care.
The loose parts and moulded shapes may be removed for cleaning. They can be brushed
very gently with a soft brush to remove dust or any deposits.
A vacuum cleaner may only be used after the loose components and moulded shapes
have been removed.
CARE SHOULD BE TAKEN TO AVOID CONTACT WITH THE REFRACTORY LINING
THIS IS A DELICATE SURFACE AND SHOULD
NOT BE WIPED OR RUBBED.
FUEL BED LAYOUT (COAL
OPTION)

Ensure the BASE MATRIX is in
position as shown located against
the rear edge of the burner outlet

Locate the LEFT HAND and RIGHT
HAND FRONT COALS as shown so
that they sit on the front rail and lean
back against the BASE MATRIX.
Note it is most important that they
are located the in their correct
positions. They are marked on the
rear "L" for LEFT HAND FRONT
COAL and "R" for RIGHT HAND
FRONT COAL.