Paragon Fires 2000 Plus Xtra, Руководство владельца

Страница: 18 / 28

LT5048 (Iss 9: 11/12)
18
PARAGON 2000 Plus Installation Instructions
SECTION NINE To Install the Appliance Continued
If an extractor fan is situated in the room this test should be repeated with the fan running.
If there is a connected room with an extractor fan, the test should be repeated with all the
doors to that room opened and the extractor fan running.
COMPLETION OF INSTALLATION
Fit the decorative trim with the four magnetic strips placed two on each vertical side flange
of the firebox - one at the top and one at the bottom. Offer the decorative trim up squarely
and centrally and push back into position.
Position a suitable fire fret up to the front of the appliance ensuring that it meets the
specification referred to earlier.
Demonstrate the lighting and extinguishing procedures to the user and the removal and
refitting of the decorative trim and fret for cleaning.
ADVISE CUSTOMER THAT:

This appliance has a naked flame, as with all such fires it is recommended that a
fireguard should be used for the protection of children, the elderly and infirm.
Fireguards should conform to BS 6539 (1984) (Fireguards for use with solid fuel
appliances).

The curing effect of heating the fuel bed and other Refractory components will cause
an initial odour. This is due to the starch used in the manufacturing process and is
non-toxic.

Any debris should be cleaned from the appliance. A vacuum cleaner can be used but
only after all the loose components have been removed. The appliance should be
serviced annually by a competent person in accordance with these instructions and the
appliance checked for spillage in accordance with the method detailed in these
instructions.
Hand these instructions over to the user.
SECTION TEN Maintenance Instructions
GENERAL
Servicing should be carried out annually by a competent person such as a Gas Safe
registered person in accordance with the current Gas Safety (Installation and Use)
Regulations 1998 (as amended), this should ensure the safe and correct operation of the
appliance.
Before commencing any service or replacement of parts, turn off the gas supply to the fire.
After servicing check for gas soundness.
When ordering spare parts please quote appliance name and serial number, these can be
found on the data badge, which is located by removing the decorative trim fret.
At least once a year, check for debris in the catchment area behind the fire and in the flue
way.
If soot has accumulated check, to establish cause, rectify and clean flue or chimney
accordingly.