Paradyne JetFusion 2004, Руководство пользователя

Страница: 81 / 216

C o n f i g u r a t i o n 4-27
Configure LAN IP Broadcast Destination
To set the LAN IP broadcast destination address (where all broadcast IP
packets received on the LAN ports will be redirected), follow the steps below.
1
On the Router Configuration menu (Figure 4.16), type
“B”
.
2
The IAD displays the current LAN IP broadcast destination address and
prompts you to enter a new address.
3
Type the new IP address. The IAD saves the changes and displays the
Router Configuration menu (Figure 4.16).
4
Continue with other configuration tasks, or press Escape to return to the
Main menu.
Display Route Table
To display the Route table and view information about statically configured
routes and dynamically learned ones, type
“D”
on the Router Configuration
menu (Figure 4.16).
The IAD displays each network address and related information:
Route Table parameters are described in the following table.
Bridge Configuration
This section describes how to configure the IAD as a bridge. A bridge is a
device that connects and passes packets between two network segments that
use the same communications protocol. A router generally improves overall
efficiency for a complex network, but a bridge provides better speed and
flexibility for the overall network.
Parameter Description
Network Address destination address
Netmask IP subnet mask; number of bits reserved for the
host ID
Gateway Address IP address of packets sent to destination
Interface IP address of outgoing interface
Metric number of hops (routers) required to reach the
specified gateway
Type static | dynamic | RIP | local