Paradyne JetFusion 2004, Руководство пользователя

Страница: 80 / 216

4-26 2 0 0 0 - A 2 - G B 2 2 - 0 0
Figure 4.24 Display Input/Output Filters Menu
unload all filters Temporarily deactivates IP Filtering.
NOTICE:
You must unload the old rule set before loading a new rule set.
Show IP Filtering
statistics
Displays statistics for IP Filtering. Shows accumulated statistics for all Input
and Output filters
Show per filter
statistics
Displays statistics for each active filter rule.
Clear IP filtering
statistics
Clears all accumulated statistics.
Configure IP Header Compression (IPHC)
IPHC reduces the number of bytes transmitted across the WAN, thus
conserving bandwidth.
To enable or disable IP header compression, follow the steps below:
1
On the Router Configuration menu (Figure 4.16), type “Q” .
2
The IAD displays the port table and prompts you to enter a port.
3
Type the port number and press Enter. The IAD displays the header
compression status and prompts you to enable or disable IP Header
Compression for G.SHDSL.
4
Type “E” to enable IP header compression on this port, or “D” to disable it.
If you enable IP header compression, the IAD displays a message similar to
the following:
Springtide Compatibility mode ENABLED (currently not
selectable)
The IAD saves the changes and displays the Router Configuration menu
(Figure 4.16). Continue with other configuration tasks, or press Escape to
return to the Main menu.