Paradyne JetFusion 2004, Руководство пользователя

Страница: 25 / 216

Q u i c k S t a r t G u i d e 2-5
3
Type or select the settings described in the table below and save your
changes.
4
Press Enter. The IAD displays the login message:
5
Enter Login ID >
NOTICE:
If the IAD does not respond, make sure the IAD is powered up, check
the cable and connections, and review the settings.
6
Type the default supervisor level user ID (
Supervisor
) (or your user ID,
if changed) and press Enter. Note that both the user ID and password are
case-sensitive. The table below lists the default user IDs and passwords.
NOTICE:
Refer to Chapter 3, “Administration,” for detailed procedures regarding
all IAD administrative tasks. Follow these procedures after performing
the basic set-up functions described in this “Quick-Start Guide”.
7
The IAD displays the password message:
Enter Password >
8
Type the default password (
supervisor
, or your password if different)
and press Enter. If login is not successful, the IAD displays the following
message:
Invalid UserID or Password - Try again
Press any key to continue...
9
Press any key, and repeat the login sequence. If you cannot log in, call your
support provider for assistance.
When you first log in, the IAD displays the Main menu ( Figure 2.2 ). The
menu may vary, depending on the IAD.
NOTICE:
If you are entering the menu to change a previously established
configuration, refer to Managing Configuration Files on page 4-1 to
Setting Value Setting Value
Bits per second 19,200 Stop bits 1
Data bits 8 Flow control None
Parity None Emulation ANSI or VT100
Security Level User ID Password
User <Enter> <Enter>
Network Administrator NetMan <Enter>
Supervisor Supervisor supervisor