98-16209
Ejector
Latches
Front View
4
Installing the NAM into a Multislot Housing
The illustration shows the 14-slot access carrier as the housing.
CAUTION:
Be sure that you install the NAM in the correct slot so that it mates with its
matching I/O card. Otherwise, you could damage your card.
1. Remove the NAM from the shipping
box. Handle only by the top and
bottom edges to avoid damaging
the card.
2. At the front of the carrier, align the
NAM with the upper and lower
tracks of the appropriate slot.
3. Slide the NAM into the tracks until it
seats with the midplane connectors.
Use care not to force the card or
bend any pins.
4. Close the carrier’s upper and lower
ejector latches to lock the card into
place, then tighten the captive
screws on the ejector latches.
Verification Check:
Did the OK LED light?
– If yes, the FrameSaver unit has power.
– If no, refer to
Troubleshooting in the User’s Guide.
