18
10. Select PVC Connections, then New. Minimally, configure the following options to
create a PVC connection to be backed up.
– Alternate Destination Link name entered (e.g., Tampa). See the ISDN Link
Profile Name.
– Alternate Destination DLCI.
– Alternate Destination EDLCI if a multiplexed DLCI.
11. Save the configuration and return to the Configuration Edit/Display menu.
12. Select Auto Backup Criteria.
13. Enable Auto Backup.
14. Specify When Auto Backup Allowed – Always or Restrict. If Restrict is selected,
specify the days and hours of the week during which automatic backup can take
place.
15. Save the change.
See
Setting Up An ISDN DBM for Dial Backup in Setup of the User’s Guide for
additional information.
Entering Trap Managers
Once the FrameSaver unit is connected to the network, SNMP Trap Managers can be
configured.
To enter SNMP managers:
1. Select SNMP Traps configuration options.
Main Menu
→
Configuration
→
Management and Communication
→
SNMP Traps
2. Minimally, enter at least one trap manager – the central site’s NMS trap manager:
– SNMP Traps is set to Enable
– Number of Trap Managers
– NMS
n IP Address (n being the first, second, third, etc., trap manager entered)
– Destination (of the management PVC that will be used to reach the trap
manager)
3. Save the configuration.
Setting Up Service Provider Connectivity
If management needs to be set up between a service provider’s customer and its
network operations center (NOC), a non-multiplexed DLCI must be configured to carry
management data between the customer’s central site and the NOC console. This
requires that a frame relay discovered DLCI needs to be modified. This is because all
auto-configured network DLCIs are configured as multiplexed DLCIs.
